precision hardcore gear

Force Recon Tactical Scope Rings with Integrated Level...


The Force Recon Tactical Rings feature a built in level housed into the lower portion of the rear scope ring. Having the level in the base of the ring assures that it is always perfectly parallel to the top of the picatinny rail which is essential for long range shooting. A perfectly plumb scope and rifle are essential for the bullet to follow a true vertical line throughout the projectile's path to the target.
These precision, long range rings offer precise mounting for your optics onto the picatinny base and will not allow the scope to move under any recoil scenario. Our wide .875 mounting platform offers a stable interface with the pic rail while the 2 cross slot bolts provide awesome clamping power. We go one step further by installing a pair of steel guide rails that press into the ring base. The ring base clamp rides on these rails to keep the clamp perfectly aligned as the 2 cross slot bolts are drawn tight against the pic mount.

The ring cap has 6 Torx bolts providing evenly distributed force onto the top of the scope.The rings and caps have a .030 radius on both sides of the scope bore to eliminate any marring or sharp contact points on your scope.

All of these features add up to the best scope mounting system you can buy at any price.



Base Clamping and Alignment:

One look at the base of our rings and you get a idea of what we call secure....
A matched pair of 10-24 socket head cross bolts threaded into the steel clamp at 40 inch pounds and apply uniform force to the side of pic rail.
A pair of stainless steel guide rails slide through the steel base clamp and maintain alignment with the ring base and clamp. This unique system affords the most robust and stable mounting of any two ring setup on the market today.


Ring Hieght Matching:

Every set of scope rings are matched to within .002” of an inch to ensure perfect height alingment base to base.
The scope bore diameters are held to a very tight tolerance of +/-.001” of an inch.
The outer edge of the scope bore has a .050” fillet radius to help eliminate stress and marring of the scope tube.


Check out this article from Rokslide's long range editor Sam Millard

rokslide logo

30 & 34mm in stock
MSRP Price
$184.99 Force Recon 30mm & 34mmTactical Scope Rings with Integrated Level

Free shipping and handling
You can add to cart below, or order by phone 208-746-7065


Watch the Rokslide video, installing Tru Level Pic Rail and Force Recon Rings.
Thanks to the folks at Rokslide for this informative how to video.

vidio button

Check out this great review from

Force Recon & Ranger Precision Scope Rings
Ring Bore Diameter: 30mm Tol. +/-.001
  34mm Tol. +/-.001
Material: Source USA Mills Billet 7075 T-6 Aircraft Aluminum
Finish Anodize: Black Anodize Mill Spec 8625 Type 3 Hardcoat
Ring Height 30mm Low:
Top of pic mount to bore center
Rings are matched within .002
Ring Height 30mm Medium:
Top of pic mount to bore center
Rings are matched within .002
Ring Height 34mm low :
Top of pic mount to bore center
Rings are matched within .002
Ring Height 34mm medium:
Top of pic mount to bore center
Rings are matched within .002

Ring Height 34mm high :
Top of pic mount to bore center

Rings are matched within .002
Ring Height 40mm medium:
Top of pic mount to bore center
Rings are matched within .002
Cap Screws: (6) Source USA 8-40 #15 Torx @ 20 Inch Pounds
Clamp Screws: (2) Source USA 10-24 SHC Grade 8 @ 40 inch Pounds
Clamp guide Rails: (2) Source USA .125 Precision dowel pins